Click image to view full size image
Pressing Mould metal Roof Panel Roll Forming Machine With 18 - 24 stations for Roof
Description:
Composition of machine
Roll forming main machine……………………………1 unit
Cutting system……………………………………..…..1 unit
Pressing system………………………………….……1 unit
Manual de-coiler……………………………………… 1 unit
Control panel……………………………………….…..1 unit
Hydraulic station…………………………………… …1 unit
Manual out table……………………… ……………….2 unit
Spare tools……………………………………………...one box
Specifications:
1: Coil width: depend on profiles
2: Working speed: 4-8m/min
3: Roll station: 18-24stations
4: Material of roller: 45# steel, polished and coated with chrome
5:Material of main shaft:45forge steel diameter roller: 75mm
6: Main power: 7.5 kw
7: Forming thickness: 0.3mm—0.8mm color steel
8: Transmission: by chain 1.2 inch single line
9: Press system: adopt Cr12 material
10: Size of machine: about 9500x1600x1200(mm) L x W x H
11: Weight: about 8000Kgs
12: Color: blue
13: Seller will provide material to test machine, the end product should be up to 3-5m at most. When the product is same as signed produce, seller will stop to test the machine.
14: Machine adopt new station (such station is very strong and the life is more long)
15: Machine should be have four 350mm height legs (joint by screw)
16: Feeding and guide: adopt 45# material, and it is east to adjust the feeding size
17: Complete machine adopt cover: it is insure operator’s safe.
18: Cutting:
(1) Machine adopt hydraulic cutting
(2) Cutting after forming: Cut the sheet after roll forming to required length
(3) Cutting motion: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start.
(4) Material of blade:&
Pressing Mould Metal Roof Panel Roll Forming Machine With 18 - 24 stations for Roof
